fix

.gitignore

@@ -0,0 +1 @@
+.DS_Store

docker-socket-proxy/Dockerfile

@@ -10,6 +10,7 @@ ARG BUILD_REF
 ARG BUILD_REPOSITORY
 ARG BUILD_VERSION
 ARG TELEGRAF_VERSION
+ARG HAPROXY_BRANCH
 ARG HAPROXY_VERSION
 ARG HAPROXY_SHA256
 
@@ -50,9 +51,9 @@ RUN set -eux; \
 	mkdir /var/lib/haproxy; \
 	chown haproxy:haproxy /var/lib/haproxy
 
-ENV HAPROXY_VERSION ${HAPROXY_VERSION}
+ENV HAPROXY_VERSION=${HAPROXY_VERSION}
-ENV HAPROXY_URL https://www.haproxy.org/download/2.8/src/haproxy-${HAPROXY_VERSION}.tar.gz
+ENV HAPROXY_URL=https://www.haproxy.org/download/${HAPROXY_BRANCH}/src/haproxy-${HAPROXY_VERSION}.tar.gz
-ENV HAPROXY_SHA256 ${HAPROXY_SHA256}
+ENV HAPROXY_SHA256=${HAPROXY_SHA256}
 
 RUN set -eux; \
 	\

docker-socket-proxy/build.yaml

@@ -1,9 +1,10 @@
 build_from:
-  aarch64: ghcr.io/hassio-addons/base:16.1.2
+  aarch64: ghcr.io/hassio-addons/base:19.0.0
-  amd64: ghcr.io/hassio-addons/base:16.1.2
+  amd64: ghcr.io/hassio-addons/base:19.0.0
-  armhf: ghcr.io/hassio-addons/base:16.1.2
+  armhf: ghcr.io/hassio-addons/base:19.0.0
-  armv7: ghcr.io/hassio-addons/base:16.1.2
+  armv7: ghcr.io/hassio-addons/base:19.0.0
-  i386: ghcr.io/hassio-addons/base:16.1.2
+  i386: ghcr.io/hassio-addons/base:19.0.0
 args:
-  HAPROXY_VERSION: 2.8.10
+  HAPROXY_BRANCH: "3.2"
-  HAPROXY_SHA256: 0d63cd46d9d10ac7dbc02f3c6769c1908f221e0a5c5b655a194655f7528d612a
+  HAPROXY_VERSION: 3.2.9
+  HAPROXY_SHA256: e660d141b29019f4d198785b0834cc3e9c96efceeb807c2fff2fc935bd3354c2

docker-socket-proxy/config.yaml

@@ -1,6 +1,6 @@
 ---
 name: Docker-Socket-Proxy
-version: 2.8.10_1
+version: 3.2.9_1
 slug: hassio_docker_socket_proxy
 description: An addon to enable TCP docker access.
 url: https://gitea.bonelle-family.dscloud.biz/francois.bonelle/hassio-repo.git

grafana_alloy/Dockerfile

@@ -0,0 +1,34 @@
+ARG BUILD_FROM
+FROM $BUILD_FROM
+
+ARG \
+  BUILD_ARCH \
+  BUILD_VERSION \
+  GRAFANA_ALLOY_VERSION
+
+LABEL \
+  io.hass.version=${BUILD_VERSION} \
+  io.hass.type="addon" \
+  io.hass.arch="${BUILD_ARCH}"
+
+RUN apt-get update && \
+  apt-get install -y --no-install-recommends \
+        unzip \
+        gettext-base \
+        curl && \
+    rm -rf /var/lib/apt/lists/* && \
+    apt clean && \
+    ARCH="${BUILD_ARCH}" && \
+    if [ "${BUILD_ARCH}" = "aarch64" ]; then ARCH="arm64"; fi && \
+    curl -J -L -o /tmp/alloy.zip "https://github.com/grafana/alloy/releases/download/v${GRAFANA_ALLOY_VERSION}/alloy-linux-${ARCH}.zip" && \
+    cd /tmp && \
+    unzip alloy.zip && \
+    mv alloy-linux-${ARCH} /usr/local/bin/alloy && \
+    chmod +x /usr/local/bin/alloy && \
+    rm -rf /tmp/alloy*
+
+COPY rootfs /
+RUN chmod +x /run.sh /etc/cont-init.d/alloy_setup.sh /etc/services.d/alloy/run
+
+ENTRYPOINT []
+CMD ["/run.sh"]

grafana_alloy/README.md

@@ -0,0 +1,84 @@
+# Grafana Alloy
+
+[Grafana Alloy](https://grafana.com/docs/alloy) combines the strengths of the leading collectors into one place. Whether observing applications, infrastructure, or both, Grafana Alloy can collect, process, and export telemetry signals to scale and future-proof your observability approach.
+
+Currently, this add-on supports the following components:
+
+- [prometheus.scrape](https://grafana.com/docs/alloy/latest/reference/components/prometheus/prometheus.scrape/) - Sends metrics to Prometheus write endpoint.
+- [prometheus.exporter.unix](https://grafana.com/docs/alloy/latest/reference/components/prometheus/prometheus.exporter.unix/) - Uses the [node_exporter](https://github.com/prometheus/node_exporter) to expose Home Assistant Hardware and OS metrics for \*nix-based systems.
+- [prometheus.exporter.process](https://grafana.com/docs/alloy/latest/reference/components/prometheus/prometheus.exporter.process/) - Enables [process_exporter](https://github.com/ncabatoff/process-exporter) to collect Home Assistant process stats from /proc.
+- [loki.write](https://grafana.com/docs/alloy/latest/reference/components/loki/loki.write/) - Sends logs to Loki instance.
+- [loki.source.journal](https://grafana.com/docs/alloy/latest/reference/components/loki/loki.source.journal/) - Collects Home Assistant Journal logs to send to Loki.
+
+## Installation
+
+1. Add [repository](https://github.com/wymangr/hassos-addons) to Home Assistant.
+1. Search for "Grafana Alloy" in the Home Assistant add-on store and install it.
+1. Disable "Protection mode" in the add-on panel. (Optional, [see below for more details](#protection-mode))
+1. Update configuration on the add-on "Configuration" Tab. See options below.
+1. Start the add-on.
+1. Check the `Logs` to confirm the add-on started successfully.
+1. You can also visit the Grafana Alloy Web UI by visiting `http://<homeassistnat_ip>:12345` in your browser.
+
+## Protection Mode
+
+Disabling protection mode is optional, however there are a few things that I found don't work without disabling it. Most the limitations are around host processes. Per the Home Assistant Docs: _"Allow the container to run on the host PID namespace. Works only for not protected add-ons."_
+
+Note: These are just the limitations I found, there may be other incorrect or missing metrics.
+
+**Only disable the protection mode if you know, need AND trust the source of this add-on.** Always review the code of an add-on before disabling protection mode.
+
+### Limitations:
+
+**prometheus.exporter.process**
+
+- If Protection mode is enabled, the only process that will be collected is the one for Alloy. There will be no metrics for host processes.
+
+**prometheus.exporter.unix**
+
+- Process related metrics won't display any host process information with protection mode enabled.
+- Disk metrics will only show mount data for the Alloy add-on, no host mount data will be collected with protection mode enabled.
+
+**loki.source.journal**
+
+No limitations that I found.
+
+## Configuration
+
+| Config                       | Description                                                                              | Default value                       | Required                    |
+| ---------------------------- | ---------------------------------------------------------------------------------------- | ----------------------------------- | --------------------------- |
+| `enable_prometheus`          | Enable sending metrics to Prometheus. If enabled, prometheus_write_endpoint is required. | true                                | No                          |
+| `prometheus_write_endpoint`  | Full URL to send metrics to.                                                             | http://prometheus:9090/api/v1/write | If `enable_prometheus`=true |
+| `enable_unix_component`      | Enables prometheus.exporter.unix component to collect node_exporter metrics.             | true                                | No                          |
+| `enable_process_component`   | Enables prometheus.exporter.process component to collect process_exporter metrics.       | true                                | No                          |
+| `prometheus_scrape_interval` | How frequently to scrape the targets of this scrape configuration.                       |                                     | No                          |
+| `servername_tag`             | servername tag value value.                                                              | HomeAssistant                       | No                          |
+| `instance_tag`               | Overwrite the default metric "instance" tag.                                             |                                     | No                          |
+| `enable_loki`                | Enable sending logs to Loki. If enabled, loki_endpoint is required.                      | false                               | No                          |
+| `loki_endpoint`              | Full Loki URL to send logs to.                                                           | http://loki:3100/api/v1/push        | No                          |
+| `enable_loki_syslog`         | Listen for syslog messages over UDP or TCP connections and forwards them to loki.        | false                               | No                          |
+| `override_config`            | If enabled, all other options will be ignored and you can supply your own Alloy config.  | false                               | No                          |
+| `override_config_path`       | Path to Override Alloy config file. HA config directory is counted to /config.           | /config/alloy/example.alloy         | If `override_config`=true   |
+
+If `override_config` is true and a valid Alloy config file is supplied in `override_config_path`, all other options will be ignored.
+
+## Support
+
+- Tested on `aarch64` and `amd64`.
+
+## Todo
+
+- [x] Add more customization options (Enable/disable components, scrape_interval, etc..)
+- [ ] Add Github workflows
+- [ ] Build and publish a docker image so users don't have to build the image on every install
+- [x] Verify all permissions added to `config.yaml` are required and remove unneeded ones
+
+## Example Data
+
+https://grafana.com/grafana/dashboards/1860-node-exporter-full/
+![prometheus.exporter.unix Example](images/prometheus.exporter.unix.png)
+
+https://grafana.com/grafana/dashboards/8378-system-processes-metrics/
+![prometheus.exporter.process Example](images/prometheus.exporter.process.png)
+
+![Loki Log Example](images/loki.png)

grafana_alloy/apparmor.txt

@@ -1,6 +1,6 @@
 #include <tunables/global>
 
-profile hassio_telegraf flags=(attach_disconnected,mediate_deleted) {
+profile grafana_alloy flags=(attach_disconnected,mediate_deleted) {
   #include <abstractions/base>
 
   # Capabilities
@@ -28,13 +28,14 @@ profile hassio_telegraf flags=(attach_disconnected,mediate_deleted) {
   /data/** rw,
 
   # Start new profile for service
-  /usr/bin/myprogram cx -> myprogram,
+  /usr/local/bin/alloy cx -> alloy,
 
-  profile myprogram flags=(attach_disconnected,mediate_deleted) {
+  profile alloy flags=(attach_disconnected,mediate_deleted) {
     #include <abstractions/base>
+    ptrace (trace,read),
 
     # Receive signals from S6-Overlay
-    signal (receive) peer=*_ADDON_SLUG,
+    signal (receive) peer=*_grafana_alloy,
 
     # Access to options.json and other files within your addon
     /data/** rw,
@@ -42,11 +43,27 @@ profile hassio_telegraf flags=(attach_disconnected,mediate_deleted) {
     # Access to mapped volumes specified in config.json
     /share/** rw,
 
+    # Temp files (Loki)
+    /tmp/.positions.* rw,
+
+    # certificates
+    /etc/ssl/certs/{,**} r,
+    /usr/share/ca-certificates/{,**} r,
+
     # Access required for service functionality
-    /usr/bin/myprogram r,
+    /usr/local/bin/alloy rm,
+    /config/** rw,
+    /etc/alloy/config.alloy r,
+    /var/log/journal/{,**} r,
+    /etc/nsswitch.conf r,
+    /proc/{,**} r,
+    /sys/** r,
+    /etc/hosts r,
+    /etc/resolv.conf r,
     /bin/bash rix,
     /bin/echo ix,
     /etc/passwd r,
     /dev/tty rw,
+    /var/run/docker.sock r,
   }
 }

grafana_alloy/build.yaml

@@ -0,0 +1,6 @@
+---
+build_from:
+  aarch64: ghcr.io/hassio-addons/debian-base:9.1.0
+  amd64: ghcr.io/hassio-addons/debian-base:9.1.0
+args:
+  GRAFANA_ALLOY_VERSION: 1.12.0

grafana_alloy/config.yaml

@@ -0,0 +1,54 @@
+---
+name: "Grafana Alloy"
+description: "Grafana Alloy"
+version: "1.12.0"
+slug: "grafana_alloy"
+arch:
+  - aarch64
+  - amd64
+  - armv7
+  - armhf
+ports:
+  12345/tcp:
+  5514/udp:
+  5601/tcp:
+ports_description:
+  12345/tcp: Alloy web server
+  5514/udp: Alloy UDP syslog
+  5601/tcp: Alloy TCP syslog
+journald: true
+host_network: true
+hassio_api: true
+homeassistant_api: true
+auth_api: true
+docker_api: true
+host_pid: true
+apparmor: false
+map:
+  - type: homeassistant_config
+    path: /config
+options:
+  enable_prometheus: true
+  prometheus_write_endpoint: http://prometheus:9090/api/v1/write
+  enable_unix_component: true
+  enable_process_component: true
+  prometheus_scrape_interval: 15s
+  servername_tag: "HomeAssistant"
+  enable_loki: false
+  loki_endpoint: http://loki:3100/api/v1/push
+  enable_loki_syslog: false
+  override_config: false
+  override_config_path: "/config/alloy/example.alloy"
+schema:
+  enable_prometheus: bool
+  prometheus_write_endpoint: str?
+  enable_unix_component: bool
+  enable_process_component: bool
+  prometheus_scrape_interval: list(15s|30s|60s)
+  servername_tag: str?
+  instance_tag: str?
+  enable_loki: bool
+  loki_endpoint: str?
+  enable_loki_syslog: bool
+  override_config: bool
+  override_config_path: str?

grafana_alloy/rootfs/etc/alloy/config.alloy.template

@@ -0,0 +1,10 @@
+
+$PROMETHEUS_CONFIG
+
+$UNIX_CONFIG
+
+$PROCESS_CONFIG
+
+$ALLOY_CONFIG
+
+$LOKI_CONFIG

grafana_alloy/rootfs/etc/cont-init.d/alloy_setup.sh

@@ -0,0 +1,160 @@
+#!/usr/bin/env bashio
+
+readonly CONFIG_DIR=/etc/alloy
+readonly CONFIG_FILE="${CONFIG_DIR}/config.alloy"
+readonly CONFIG_TEMPLATE="${CONFIG_DIR}/config.alloy.template"
+
+
+if bashio::config.true 'override_config'; then
+    if bashio::config.is_empty 'override_config_path'; then
+        bashio::config.require 'override_config_path' "Config override is Enabled, must set override_config_path"
+    fi
+else
+    # Add Prometheus Write Endpoint
+    if bashio::config.true 'enable_prometheus'; then
+
+        bashio::config.require 'prometheus_write_endpoint' "You need to supply Prometheus write endpoint"
+        EXTERNAL_LABELS=""
+        RELABEL_CONFIG=""
+
+        # Prometheus Write Endpoint
+        if bashio::config.has_value 'prometheus_write_endpoint'; then
+            PROMETHEUS_ENDPOINT="$(bashio::config "prometheus_write_endpoint")"
+        fi
+
+        # Servername External Label
+        if bashio::config.has_value 'servername_tag'; then
+            EXTERNAL_LABELS="
+                    external_labels = {
+                        \"servername\" = \"$(bashio::config "servername_tag")\",
+                    }"
+        fi
+
+        # Relabel "instance" tag if configured
+        if bashio::config.has_value 'instance_tag'; then
+            RELABEL_CONFIG="
+                        write_relabel_config {
+                            action        = \"replace\"
+                            source_labels = [\"instance\"]
+                            target_label  = \"instance\"
+                            replacement   = \"$(bashio::config "instance_tag")\"
+                        }"
+        fi
+        export PROMETHEUS_CONFIG="
+        prometheus.remote_write \"default\" {
+            endpoint {
+                url = \"$PROMETHEUS_ENDPOINT\"
+
+                metadata_config {
+                    send_interval = \"$(bashio::config "prometheus_scrape_interval")\"
+                }
+                $RELABEL_CONFIG
+            }
+            $EXTERNAL_LABELS
+        }"
+
+        ## Enable prometheus.exporter.unix
+        if bashio::config.true 'enable_unix_component'; then
+            export UNIX_CONFIG="
+            prometheus.exporter.unix \"node_exporter\" { }
+            prometheus.scrape \"unix\" {
+                targets         = prometheus.exporter.unix.node_exporter.targets
+                forward_to      = [prometheus.remote_write.default.receiver]
+                scrape_interval = \"$(bashio::config "prometheus_scrape_interval")\"
+            }"
+        fi
+
+        ## Enable prometheus.exporter.process
+        if bashio::config.true 'enable_process_component'; then
+            export PROCESS_CONFIG="
+            prometheus.exporter.process \"process_exporter\" {
+                matcher {
+                        name    = \"{{.Comm}}\"
+                        cmdline = [\".+\"]
+                    }
+            }
+            prometheus.scrape \"process\" {
+                targets         = prometheus.exporter.process.process_exporter.targets
+                forward_to      = [prometheus.remote_write.default.receiver]
+                scrape_interval = \"$(bashio::config "prometheus_scrape_interval")\"
+            }"
+        fi
+
+        export ALLOY_CONFIG="
+        prometheus.exporter.self \"alloy\" { }
+        prometheus.scrape \"self\" {
+            targets         = prometheus.exporter.self.alloy.targets
+            forward_to      = [prometheus.remote_write.default.receiver]
+            scrape_interval = \"$(bashio::config "prometheus_scrape_interval")\"
+        }"
+    fi
+
+    # Add Loki to config if endpoint is supplied
+    if bashio::config.true 'enable_loki'; then
+
+        bashio::config.require 'loki_endpoint' "You need to supply Loki endpoint"
+
+        if bashio::config.has_value 'servername_tag'; then
+            labels="{component = \"loki.source.journal\", servername = \"$(bashio::config "servername_tag")\"}"
+        else
+            labels="{component = \"loki.source.journal\"}"
+        fi
+
+        if bashio::config.true 'enable_loki_syslog'; then
+            syslog_config="
+        loki.source.syslog \"syslog\" {
+            listener {
+                address  = \"0.0.0.0:5601\"
+                labels   = { component = \"loki.source.syslog\", protocol = \"tcp\" }
+            }
+            listener {
+                address  = \"0.0.0.0:5514\"
+                protocol = \"udp\"
+                labels   = { component = \"loki.source.syslog\", protocol = \"udp\"}
+            }
+            forward_to = [loki.write.endpoint.receiver]
+        }"
+        else
+            syslog_config=""
+        fi
+
+        export LOKI_CONFIG="
+        loki.relabel \"journal\" {
+            forward_to = []
+            rule {
+                source_labels = [\"__journal__systemd_unit\"]
+                target_label  = \"unit\"
+            }
+            rule {
+                source_labels = [\"__journal__hostname\"]
+                target_label  = \"nodename\"
+            }
+            rule {
+                source_labels = [\"__journal_syslog_identifier\"]
+                target_label  = \"syslog_identifier\"
+            }
+            rule {
+                source_labels = [\"__journal_container_name\"]
+                target_label  = \"container_name\"
+            }
+            rule {
+                action = \"drop\"
+                source_labels = [\"syslog_identifier\"]
+                regex = \"audit\"
+            }
+        }
+        loki.source.journal \"read\"  {
+            forward_to    = [loki.write.endpoint.receiver]
+            relabel_rules = loki.relabel.journal.rules
+            labels        = $labels
+            path          = \"/var/log/journal\"
+        }
+        $syslog_config
+        loki.write \"endpoint\" {
+            endpoint {
+                url = \"$(bashio::config "loki_endpoint")\"
+            }
+        }"
+    fi
+    envsubst < $CONFIG_TEMPLATE > $CONFIG_FILE
+fi

grafana_alloy/rootfs/etc/services.d/alloy/run

@@ -0,0 +1,18 @@
+#!/usr/bin/env bashio
+# ==============================================================================
+# Home Assistant Community Add-on: Grafana Alloy
+# Runs the Grafana Alloy
+# ==============================================================================
+
+OVERRIDE_CONFIG=$(bashio::config 'override_config_path')
+
+if bashio::config.false 'override_config'; then
+    CONFIG_FILE=/etc/alloy/config.alloy
+else
+    CONFIG_FILE=$OVERRIDE_CONFIG
+fi
+bashio::log.info "Starting Grafana Alloy with ${CONFIG_FILE}"
+bashio::log.info "$(cat ${CONFIG_FILE})"
+
+# Run Alloy
+exec /usr/local/bin/alloy run --server.http.listen-addr=0.0.0.0:12345 --disable-reporting --storage.path=/data $CONFIG_FILE

grafana_alloy/rootfs/run.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bashio
+
+/etc/cont-init.d/alloy_setup.sh
+
+exec /etc/services.d/alloy/run

grafana_alloy/translations/en.yaml

@@ -0,0 +1,38 @@
+---
+configuration:
+  enable_prometheus:
+    name: Enable Prometheus Metrics
+    description: Enable sending metrics to Prometheus. If enabled, prometheus_write_endpoint is required
+  prometheus_write_endpoint:
+    name: Prometheus Write Endpoint
+    description: Full URL to send metrics to.
+  enable_unix_component:
+    name: Enable Unix System Metrics
+    description: Enables prometheus.exporter.unix component to collect node_exporter metrics
+  enable_process_component:
+    name: Enable Process Metrics
+    description: Enables prometheus.exporter.process component to collect process_exporter metrics
+  prometheus_scrape_interval:
+    name: Prometheus Scrape Interval
+    description: How frequently to scrape the targets of this scrape configuration
+  servername_tag:
+    name: Servername Tag
+    description: servername tag value
+  instance_tag:
+    name: Instance Tag
+    description: Overwrite the default metric "instance" tag
+  enable_loki:
+    name: Enable Loki
+    description: Enable sending logs to Loki. If enabled, loki_endpoint is required
+  loki_endpoint:
+    name: Loki Endpoint
+    description: Full Loki URL to send logs to
+  override_config:
+    name: Override Config
+    description: If enabled, all other options will be ignored and you can supply your own Alloy config
+  override_config_path:
+    name: Override Config Path
+    description: Path to Override Alloy config file
+  enable_loki_syslog:
+    name: Enable Loki Syslog
+    description: Listen for syslog messages over UDP or TCP connections and forwards them to loki

promtail/DOCS.md

@@ -1,327 +0,0 @@
-# Home Assistant Add-on: Promtail
-
-## Install
-
-First add the repository to the add-on store (`https://gitea.bonelle-family.dscloud.biz/francois.bonelle/hassio-repo.git`):
-
-[![Open your Home Assistant instance and show the add add-on repository dialog
-with a specific repository URL pre-filled.][add-repo-shield]][add-repo]
-
-Then find Promtail in the store and click install:
-
-[![Open your Home Assistant instance and show the dashboard of a Supervisor add-on.][add-addon-shield]][add-addon]
-
-## Default Setup
-
-By default this addon version of Promtail will tail logs from the systemd
-journal. This will include all logs from all addons, supervisor, home assistant,
-docker, and the host system itself. It will then ship them to the Loki add-on in
-this same repository if you have it installed. No additional configuration is
-required if this is the setup you want.
-
-If you adjusted the configuration of the Loki add-on, have a separate Loki
-add-on or have other log files you want Promtail to monitor then see below for
-the configuration options.
-
-## Configuration
-
-**Note**: _Remember to restart the add-on when the configuration is changed._
-
-Example add-on configuration:
-
-```yaml
-client:
-  url: http://39bd2704-loki:3100
-  username: loki
-  password: secret
-  cafile: /ssl/ca.pem
-additional_scrape_configs: /share/promtail/scrape_configs.yaml
-log_level: info
-```
-
-**Note**: _This is just an example, don't copy and paste it! Create your own!_
-
-### Option: `client.url` (required)
-
-The URL of the Loki deployment Promtail should ship logs to.
-
-If you use the Loki add-on, this will be `http://39bd2704-loki:3100` (unless you
-enabled `ssl`, then change it to `https`). If you use Grafana Cloud then the URL
-will look like this: `https://<User>:<Your Grafana.com API Key>@logs-prod-us-central1.grafana.net/api/prom/push`
-([see here for more info][grafana-cloud-docs-promtail]).
-
-### Option: `client.username`
-
-The username to use if you require basic auth to connect to your Loki deployment.
-
-### Option: `client.password`
-
-The password for the username you choose if you require basic auth to connect to
-your Loki deployment. **Note**: This field is required if `client.username` is
-provided.
-
-### Option: `client.cafile`
-
-The CA certificate used to sign Loki's certificate if Loki is using a self-signed
-certificate for SSL.
-
-**Note**: _The file MUST be stored in `/ssl/`, which is the default_
-
-### Option: `client.servername`
-
-The servername listed on the certificate Loki is using if using SSL to connect
-by a different URL then what's on Loki's certificate (usually if the certificate
-lists a public URL and you're connecting locally).
-
-### Option: `client.certfile`
-
-The absolute path to a certificate for client-authentication if Loki is using
-mTLS to authenticate clients.
-
-### Option: `client.keyfile`
-
-The absolute path to the key for the client-authentication certificate if Loki
-is using mTLS to authenticate clients. **Note**: This field is required if
-`client.certfile` is provided
-
-### Option: `additional_pipeline_stages`
-
-The absolute path to a YAML file with a list of additional pipeline stages to
-apply to the [default journal scrape config][addon-default-config]. The primary
-use of this is to apply additional processing to logs from particular add-ons
-you use if they are noisy or difficult to read.
-
-This file must contain only a YAML list of pipeline stages. They will be added
-to the end of the ones already listed. If you don't like the ones listed, use
-`skip_default_scrape_config` and `additional_scrape_configs` to write your own
-instead. Here's an example of the contents of this file:
-
-```yaml
-- match:
-    selector: '{container_name="addon_cebe7a76_hassio_google_drive_backup"}'
-    stages:
-      - multiline:
-          firstline: '^\x{001b}'
-```
-
-This particular example applies to the [google drive backup addon][addon-google-drive-backup].
-It uses the same log format as Home Assistant and outputs the escape character
-at the start of each log line for color-coding in terminals. Looking for that
-in a multiline stage makes it so tracebacks are included in the same log entry
-as the error that caused them for easier readability.
-
-See the [promtail documentation][promtail-doc-stages] for more information on how
-to configure pipeline stages.
-
-**Note**: This addon has access to `/ssl`, `/share` and `/config/promtail`. Place
-the file in one of these locations, others will not work.
-
-### Option: `skip_default_scrape_config`
-
-Promtail will scrape the `systemd journal` using a pre-defined config you can
-find [here][addon-default-config]. If you only want it to look at specific log
-files you specify or you don't like the default config and want to adjust it, set
-this to `true`. Then the only scrape configs used will be the ones you specify
-in the `additional_scrape_configs` file.
-
-**Note**: This addon has access to `/ssl`, `/share` and `/config/promtail`. Place
-the file in one of these locations, others will not work.
-
-### Option: `additional_scrape_configs`
-
-The absolute path to a YAML file with a list of additional scrape configs for
-Promtail to use. The primary use of this is to point Promtail at additional log
-files created by add-ons which don't use `stdout` for all logging. You an also
-change the system journal is scraped by using this in conjunction with
-`skip_default_scrape_config`. **Note**: If `skip_default_scrape_config` is `true`
-then this field becomes required (otherwise there would be no scrape configs)
-
-The file must contain only a YAML list of scrape configs. Here's an example of
-the contents of this file:
-
-```yaml
-- job_name: zigbee2mqtt_messages
-  pipeline_stages:
-  static_configs:
-    - targets:
-        - localhost
-      labels:
-        job: zigbee2mqtt_messages
-        __path__: /share/zigbee2mqtt/log/**.txt
-```
-
-This particular example would cause Promtail to scrape up the logs MQTT that the
-[Zigbee2MQTT add-on][addon-z2m] makes by default.
-
-Promtail provides a lot of options for configuring scrape configs. See the
-documentation on [scrape_configs][promtail-doc-scrape-configs] for more info on
-the options available and how to configure them. The documentation also provides
-[other examples][promtail-doc-examples] you can use.
-
-I would also recommend reading the [Loki best practices][loki-doc-best-practices]
-guide before making custom scrape configs. Pipelines are pretty powerful but
-avoid making too many labels, it does more harm then good. Instead look into
-what you can do with [LogQL][logql] can do at the other end.
-
-**Note**: This addon has access to `/ssl`, `/share` and `/config/promtail`. Place
-the file in one of these locations, others will not work.
-
-### Port: `9080/tcp`
-
-Promtail expose an [API][api] on this port. This is primarily used for healthchecks
-by the supervisor watchdog which does not require exposing it on the host. Most
-users should leave this option disabled unless you have an external application
-doing healthchecks.
-
-For advanced users creating custom scrape configs the other purpose of this API
-is to expose metrics created by the [metrics][promtail-doc-metrics] pipeline
-stage. Exposing this port would then allow you to read those metrics from another
-system on your network.
-
-### Option: `log_level`
-
-The `log_level` option controls the level of log output by the addon and can
-be changed to be more or less verbose, which might be useful when you are
-dealing with an unknown issue. Possible values are:
-
-- `debug`: Shows detailed debug information.
-- `info`: Normal (usually) interesting events.
-- `warning`: Exceptional occurrences that are not errors.
-- `error`: Runtime errors that do not require immediate action.
-
-Please note that each level automatically includes log messages from a
-more severe level, e.g., `debug` also shows `info` messages. By default,
-the `log_level` is set to `info`, which is the recommended setting unless
-you are troubleshooting.
-
-## PLG Stack (Promtail, Loki and Grafana)
-
-Promtail isn't a standalone application, it's job is to find logs, process them
-and ship them to Loki. Most likely you want the full PLG stack:
-
-- Promtail to process and ship logs
-- Loki to aggregate and index them
-- Grafana to visualize and monitor them
-
-### Loki
-
-The easiest way to get started is to also install the Loki add-on in this same
-repository. By default this add-on is set up to collect all logs from the system
-journal and ship them over to that add-on. If that's what you want there is no
-additional configuration required for either.
-
-[![Open your Home Assistant instance and show the dashboard of a Supervisor add-on.][add-addon-shield]][add-addon-loki]
-
-Alternatively you can deploy Loki somewhere else. Take a look at the
-[Loki documentation][loki-doc] for info on setting up a Loki deployment and
-connecting Promtail to it.
-
-### Grafana
-
-Once you have Loki and Promtail set up you will probably want to connect to it
-from [Grafana][grafana]. The easiest way to do that is to use the
-[Grafana community add-on][addon-grafana]. From there you can find Loki in the
-list of data sources and configure the connection (see [Loki in Grafana][loki-in-grafana]).
-If you did choose to use the Loki add-on you can find additional instructions in
-[the add-on's documentation][addon-loki-doc].
-
-[![Open your Home Assistant instance and show the dashboard of a Supervisor add-on.][add-addon-shield]][add-addon-grafana]
-
-### Grafana Cloud
-
-If you prefer, you can also use Grafana's cloud service,
-[see here](https://grafana.com/products/cloud/) on how to get started. This
-service takes the place of both Loki and Grafana in the PLG stack, you just
-point Promtail at it and you're done. To do this, first create an account then
-[review this guide][grafana-cloud-docs-promtail] to see how to connect Promtail
-to your account. Essentially its just a different URL since the credential information
-goes in the URL.
-
-## Changelog & Releases
-
-This repository keeps a change log using [GitHub's releases][releases]
-functionality.
-
-Releases are based on [Semantic Versioning][semver], and use the format
-of `MAJOR.MINOR.PATCH`. In a nutshell, the version will be incremented
-based on the following:
-
-- `MAJOR`: Incompatible or major changes.
-- `MINOR`: Backwards-compatible new features and enhancements.
-- `PATCH`: Backwards-compatible bugfixes and package updates.
-
-## Support
-
-Got questions?
-
-You have several ways to get them answered:
-
-- The Home Assistant [Community Forum][forum]. I am
-  [CentralCommand][forum-centralcommand] there.
-- The Home Assistant [Discord Chat Server][discord-ha]. Use the #add-ons channel,
-  I am CentralCommand#0913 there.
-
-You could also [open an issue here][issue] on GitHub.
-
-## Authors & contributors
-
-The original setup of this repository is by [Mike Degatano][mdegat01].
-
-For a full list of all authors and contributors,
-check [the contributor's page][contributors].
-
-## License
-
-MIT License
-
-Copyright (c) 2021-2022 Mike Degatano
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-
-[add-addon-shield]: https://my.home-assistant.io/badges/supervisor_addon.svg
-[add-addon]: https://my.home-assistant.io/redirect/supervisor_addon/?addon=39bd2704_promtail
-[add-addon-grafana]: https://my.home-assistant.io/redirect/supervisor_addon/?addon=a0d7b954_grafana
-[add-addon-loki]: https://my.home-assistant.io/redirect/supervisor_addon/?addon=39bd2704_loki
-[add-repo-shield]: https://my.home-assistant.io/badges/supervisor_add_addon_repository.svg
-[add-repo]: https://my.home-assistant.io/redirect/supervisor_add_addon_repository/?repository_url=https%3A%2F%2Fgithub.com%2Fmdegat01%2Fhassio-addons
-[addon-default-config]: https://github.com/mdegat01/addon-promtail/blob/main/promtail/rootfs/etc/promtail/default-scrape-config.yaml
-[addon-grafana]: https://github.com/hassio-addons/addon-grafana
-[addon-google-drive-backup]: https://github.com/sabeechen/hassio-google-drive-backup
-[addon-loki-doc]: https://github.com/mdegat01/addon-loki/blob/main/loki/DOCS.md#grafana
-[addon-z2m]: https://github.com/zigbee2mqtt/hassio-zigbee2mqtt
-[api]: https://grafana.com/docs/loki/latest/clients/promtail/#api
-[contributors]: https://github.com/mdegat01/addon-promtail/graphs/contributors
-[discord-ha]: https://discord.gg/c5DvZ4e
-[forum-centralcommand]: https://community.home-assistant.io/u/CentralCommand/?u=CentralCommand
-[forum]: https://community.home-assistant.io/t/home-assistant-add-on-promtail/293732?u=CentralCommand
-[grafana]: https://grafana.com/oss/grafana/
-[grafana-cloud]: https://grafana.com/products/cloud/
-[grafana-cloud-docs-promtail]: https://grafana.com/docs/grafana-cloud/quickstart/logs_promtail_linuxnode/
-[issue]: https://github.com/mdegat01/addon-promtail/issues
-[logql]: https://grafana.com/docs/loki/latest/logql/
-[loki-doc]: https://grafana.com/docs/loki/latest/overview/
-[loki-doc-best-practices]: https://grafana.com/docs/loki/latest/best-practices/
-[loki-in-grafana]: https://grafana.com/docs/loki/latest/getting-started/grafana/
-[mdegat01]: https://github.com/mdegat01
-[promtail-doc-examples]: https://grafana.com/docs/loki/latest/clients/promtail/configuration/#example-static-config
-[promtil-doc-metrics]: https://grafana.com/docs/loki/latest/clients/promtail/configuration/#metrics
-[promtail-doc-scrape-configs]: https://grafana.com/docs/loki/latest/clients/promtail/configuration/#scrape_configs
-[promtail-doc-stages]: https://grafana.com/docs/loki/latest/clients/promtail/stages/
-[releases]: https://github.com/mdegat01/addon-promtail/releases
-[semver]: http://semver.org/spec/v2.0.0

promtail/Dockerfile

@@ -1,67 +0,0 @@
-ARG BUILD_FROM
-FROM ${BUILD_FROM}
-
-# Build arguments
-ARG BUILD_ARCH
-ARG BUILD_DATE
-ARG BUILD_DESCRIPTION
-ARG BUILD_NAME
-ARG BUILD_REF
-ARG BUILD_REPOSITORY
-ARG BUILD_VERSION
-ARG YQ_VERSION
-ARG PROMTAIL_VERSION
-
-# Add yq and tzdata (required for the timestamp stage)
-RUN set -eux; \
-    apt-get update; \
-    apt-get install -qy --no-install-recommends \ 
-        tar \
-        unzip \
-        libsystemd-dev \
-        ; \
-    update-ca-certificates; \
-    case "${BUILD_ARCH}" in \
-        amd64)  BINARCH='amd64' ;; \
-        armhf)   BINARCH='arm' ;; \
-        armv7)   BINARCH='arm' ;; \
-        aarch64) BINARCH='arm64' ;; \
-        *) echo >&2 "error: unsupported architecture (${APKARCH})"; exit 1 ;; \
-    esac; \
-    curl -s -J -L -o /tmp/yq.tar.gz \
-        "https://github.com/mikefarah/yq/releases/download/v${YQ_VERSION}/yq_linux_${BINARCH}.tar.gz"; \
-    tar -xf /tmp/yq.tar.gz -C /usr/bin; \
-    mv /usr/bin/yq_linux_${BINARCH} /usr/bin/yq; \
-    chmod a+x /usr/bin/yq; \
-    rm /tmp/yq.tar.gz; \
-    yq --version; \
-    apt-get clean; \
-    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*; \
-    curl -s -J -L -o /tmp/promtail.zip \
-        "https://github.com/grafana/loki/releases/download/v${PROMTAIL_VERSION}/promtail-linux-${BINARCH}.zip"; \
-    unzip /tmp/promtail.zip -d /usr/bin; \
-    mv /usr/bin/promtail-linux-${BINARCH} /usr/bin/promtail; \
-    chmod +x /usr/bin/promtail; \
-    rm /tmp/promtail.zip; \
-    mkdir -p /data/promtail; \
-    rm -rf /var/lib/apt/lists/*
-
-COPY rootfs /
-WORKDIR /data/promtail
-
-# Labels
-LABEL \
-    io.hass.name="${BUILD_NAME}" \
-    io.hass.description="${BUILD_DESCRIPTION}" \
-    io.hass.arch="${BUILD_ARCH}" \
-    io.hass.type="addon" \
-    io.hass.version=${BUILD_VERSION} \
-    maintainer="fbonelle" \
-    org.opencontainers.image.title="${BUILD_NAME}" \
-    org.opencontainers.image.description="${BUILD_DESCRIPTION}" \
-    org.opencontainers.image.vendor="fbonelle's addons" \
-    org.opencontainers.image.authors="fbonelle" \
-    org.opencontainers.image.licenses="MIT" \
-    org.opencontainers.image.created=${BUILD_DATE} \
-    org.opencontainers.image.revision=${BUILD_REF} \
-    org.opencontainers.image.version=${BUILD_VERSION}

promtail/apparmor.txt

@@ -1,123 +0,0 @@
-include <tunables/global>
-
-# Docker overlay
-@{docker_root}=/docker/ /var/lib/docker/
-@{fs_root}=/ @{docker_root}/overlay2/*/diff/
-@{do_etc}=@{fs_root}/etc/
-@{do_opt}=@{fs_root}/opt/
-@{do_run}=@{fs_root}/{run,var/run}/
-@{do_usr}=@{fs_root}/usr/
-@{do_var}=@{fs_root}/var/
-
-# Systemd Journal location
-@{journald}=/{run,var}/log/journal/{,**}
-
-profile hassio_promtail flags=(attach_disconnected,mediate_deleted) {
-  include <abstractions/base>
-  include <abstractions/bash>
-
-  # Send signals to child services
-  signal (send) peer=@{profile_name}//*,
-
-  # Network access
-  network tcp,
-  network udp,
-
-  # S6-Overlay
-  /init                                   rix,
-  /bin/**                                 rix,
-  @{do_usr}/bin/**                        rix,
-  @{do_usr}/sbin/**                       rix,
-  @{do_usr}/share/{,**}                   r,
-  @{do_usr}/lib/locale/{,**}              r,
-  @{do_etc}/*                             rw,
-  @{do_etc}/s6*/**                        r,
-  @{do_etc}/fix-attrs.d/{,**}             r,
-  @{do_etc}/cont-{init,finish}.d/{,**}    rwix,
-  @{do_etc}/services.d/{,**}              rwix,
-  @{do_etc}/ssl/openssl.cnf               r,
-  @{do_etc}/{group,hosts,passwd}          r,
-  @{do_etc}/{host,nsswitch,resolv}.conf   r,
-  @{do_run}/{s6,s6-rc*,service}/**        rix,
-  @{do_run}/{,**}                         rwk,
-  /var/cache/{,**}                        rw,
-  /dev/tty                                rw,
-  /dev/null                               k,
-  /command/**                             rix,
-  /package/**                             rix,
-
- 
-  # Bashio
-  @{do_usr}/lib/bashio/**                 ix,
-  /tmp/**                                 rw,
-
-  # Options.json & addon data
-  /data                                   r,
-  /data/**                                rw,
-
-  # Files needed for setup
-  @{do_etc}/promtail/{,**}                rw,
-  /config/promtail/{,**}                  r,
-  /{share,ssl}/{,**}                      r,
-  @{journald}                             r,
-
-  # Programs
-  /usr/bin/promtail                       cx -> promtail_profile,
-  /usr/bin/yq                             Cx -> yq_profile,
-  /usr/sbin/dpkg-reconfigure              Cx -> dpkg_reconfigure_profile,
-
-  profile promtail_profile flags=(attach_disconnected,mediate_deleted) {
-    include <abstractions/base>
-
-    # Receive signals from s6
-    signal (receive) peer=*_promtail,
-
-    # Network access
-    network tcp,
-    network udp,
-    network netlink raw,
-    network unix dgram,
-
-    # Temp files
-    /tmp/.positions.yaml*                 rw,
-
-    # Addon data
-    /data/**                              r,
-    /data/promtail/**                     rwk,
-
-    # Config & log data
-    @{do_etc}/promtail/config.yaml        r,
-    /config/promtail/{,**}                r,
-    /{share,ssl}/**                       r,
-    @{journald}                           r,
-
-    # Runtime usage
-    /usr/bin/promtail                     rm,
-    @{do_etc}/{hosts,passwd}              r,
-    @{do_etc}/{resolv,nsswitch}.conf      r,
-    @{PROC}/sys/net/core/somaxconn        r,
-    @{sys}/kernel/mm/transparent_hugepage/hpage_pmd_size r,
-    /dev/null                             k,
-    @{do_etc}/ssl/certs/**                r,
-  }
-
-  profile yq_profile flags=(attach_disconnected,mediate_deleted) {
-    include <abstractions/base>
-
-    # Config files
-    @{do_etc}/promtail/*                  rw,
-    /config/promtail/{,**}                r,
-    /share/**                             r,
-
-    # Runtime usage
-    /usr/bin/yq                           rm,
-    @{sys}/kernel/mm/transparent_hugepage/hpage_pmd_size r,
-    /dev/null                             k,
-  }
-
-  profile dpkg_reconfigure_profile flags=(attach_disconnected,mediate_deleted) {
-    include <abstractions/base>
-
-    /**                                   rwlkmix,
-  }
-}

promtail/build.yaml

@@ -1,10 +0,0 @@
----
-build_from:
-  aarch64: ghcr.io/hassio-addons/debian-base:7.3.5
-  amd64: ghcr.io/hassio-addons/debian-base:7.3.5
-  armhf: ghcr.io/hassio-addons/debian-base:7.3.5
-  armv7: ghcr.io/hassio-addons/debian-base:7.3.5
-  i386: ghcr.io/hassio-addons/debian-base:7.3.5
-args:
-  YQ_VERSION: 4.44.2
-  PROMTAIL_VERSION: 3.1.0

promtail/config.yaml

@@ -1,39 +0,0 @@
----
-name: Promtail
-url: https://gitea.bonelle-family.dscloud.biz/francois.bonelle/hassio-repo.git
-version: 3.1.0
-slug:  hassio_promtail
-arch:
-  - aarch64
-  - amd64
-  - armv7
-  - armhf
-description: Promtail for Home Assistant
-init: false
-journald: true
-map:
-  - config
-  - share
-  - ssl
-watchdog: http://[HOST]:[PORT:9080]/ready
-ports:
-  9080/tcp:
-ports_description:
-  9080/tcp: Promtail web server
-options:
-  client:
-    url: http://loki:3100/loki/api/v1/push
-  log_level: info
-schema:
-  client:
-    url: str
-    username: str?
-    password: password?
-    cafile: str?
-    servername: str?
-    certfile: str?
-    keyfile: str?
-  additional_pipeline_stages: str?
-  additional_scrape_configs: str?
-  skip_default_scrape_config: bool?
-  log_level: list(trace|debug|info|notice|warning|error|fatal)?

promtail/rootfs/etc/cont-init.d/promtail_setup.sh

@@ -1,129 +0,0 @@
-#!/usr/bin/with-contenv bashio
-# shellcheck shell=bash
-# ==============================================================================
-# Home Assistant Add-on: Promtail
-# This file makes the config file from inputs
-# ==============================================================================
-readonly CONFIG_DIR=/etc/promtail
-readonly CONFIG_FILE="${CONFIG_DIR}/config.yaml"
-readonly BASE_CONFIG="${CONFIG_DIR}/base_config.yaml"
-readonly DEF_SCRAPE_CONFIGS="${CONFIG_DIR}/default-scrape-config.yaml"
-readonly CUSTOM_SCRAPE_CONFIGS="${CONFIG_DIR}/custom-scrape-config.yaml"
-declare cafile
-declare add_stages
-declare add_scrape_configs
-scrape_configs="${DEF_SCRAPE_CONFIGS}"
-
-bashio::log.info 'Setting base config for promtail...'
-cp "${BASE_CONFIG}" "${CONFIG_FILE}"
-
-# Set up client section
-if ! bashio::config.is_empty 'client.username'; then
-    bashio::log.info 'Adding basic auth to client config...'
-    bashio::config.require 'client.password' "'client.username' is specified"
-    {
-        echo "    basic_auth:"
-        echo "      username: $(bashio::config 'client.username')"
-        echo "      password: $(bashio::config 'client.password')"
-    } >> "${CONFIG_FILE}"
-fi
-
-if ! bashio::config.is_empty 'client.cafile'; then
-    bashio::log.info "Adding TLS to client config..."
-    cafile="/ssl/$(bashio::config 'client.cafile')"
-
-    if ! bashio::fs.file_exists "${cafile}"; then
-        bashio::log.fatal
-        bashio::log.fatal "The file specified for 'cafile' does not exist!"
-        bashio::log.fatal "Ensure the CA certificate file exists and full path is provided"
-        bashio::log.fatal
-        bashio::exit.nok
-    fi
-    {
-        echo "    tls_config:"
-        echo "      ca_file: ${cafile}"
-    } >> "${CONFIG_FILE}"
-
-    if ! bashio::config.is_empty 'client.servername'; then
-        echo "      server_name: $(bashio::config 'client.servername')" >> "${CONFIG_FILE}"
-    fi
-
-    if ! bashio::config.is_empty 'client.certfile'; then
-        bashio::log.info "Adding mTLS to client config..."
-        bashio::config.require 'client.keyfile' "'client.certfile' is specified"
-        if ! bashio::fs.file_exists "$(bashio::config 'client.certfile')"; then
-            bashio::log.fatal
-            bashio::log.fatal "The file specified for 'certfile' does not exist!"
-            bashio::log.fatal "Ensure the certificate file exists and full path is provided"
-            bashio::log.fatal
-            bashio::exit.nok
-        fi
-        if ! bashio::fs.file_exists "$(bashio::config 'client.keyfile')"; then
-            bashio::log.fatal
-            bashio::log.fatal "The file specified for 'keyfile' does not exist!"
-            bashio::log.fatal "Ensure the key file exists and full path is provided"
-            bashio::log.fatal
-            bashio::exit.nok
-        fi
-        {
-            echo "      cert_file: $(bashio::config 'client.certfile')"
-            echo "      key_file: $(bashio::config 'client.keyfile')"
-        } >> "${CONFIG_FILE}"
-    fi
-fi
-
-# Add in scrape configs
-{
-    echo
-    echo "scrape_configs:"
-} >> "${CONFIG_FILE}"
-if bashio::config.true 'skip_default_scrape_config'; then
-    bashio::log.info 'Skipping default journald scrape config...'
-    if ! bashio::config.is_empty 'additional_pipeline_stages'; then
-        bashio::log.warning
-        bashio::log.warning "'additional_pipeline_stages' ignored since 'skip_default_scrape_config' is true!"
-        bashio::log.warning 'See documentation for more information.'
-        bashio::log.warning
-    fi
-    bashio::config.require 'additional_scrape_configs' "'skip_default_scrape_config' is true"
-
-elif ! bashio::config.is_empty 'additional_pipeline_stages'; then
-    bashio::log.info "Adding additional pipeline stages to default journal scrape config..."
-    add_stages="$(bashio::config 'additional_pipeline_stages')"
-    scrape_configs="${CUSTOM_SCRAPE_CONFIGS}"
-    if ! bashio::fs.file_exists "${add_stages}"; then
-        bashio::log.fatal
-        bashio::log.fatal "The file specified for 'additional_pipeline_stages' does not exist!"
-        bashio::log.fatal "Ensure the file exists at the path specified"
-        bashio::log.fatal
-        bashio::exit.nok
-    fi
-
-    yq -NP eval-all \
-        'select(fi == 0) + [{"add_pipeline_stages": select(fi == 1)}]' \
-        "${DEF_SCRAPE_CONFIGS}" "${add_stages}" \
-    | yq -NP e \
-        '[(.[0] * .[1]) | {"job_name": .job_name, "journal": .journal, "relabel_configs": .relabel_configs, "pipeline_stages": .pipeline_stages + .add_pipeline_stages}]' \
-        - > "${scrape_configs}"
-fi
-
-if ! bashio::config.is_empty 'additional_scrape_configs'; then
-    bashio::log.info "Adding custom scrape configs..."
-    add_scrape_configs="$(bashio::config 'additional_scrape_configs')"
-    if ! bashio::fs.file_exists "${add_scrape_configs}"; then
-        bashio::log.fatal
-        bashio::log.fatal "The file specified for 'additional_scrape_configs' does not exist!"
-        bashio::log.fatal "Ensure the file exists at the path specified"
-        bashio::log.fatal
-        bashio::exit.nok
-    fi
-
-    if bashio::config.true 'skip_default_scrape_config'; then
-        yq -NP e '[] + .' "${add_scrape_configs}" >> "${CONFIG_FILE}"
-    else
-        yq -NP eval-all 'select(fi == 0) + select(fi == 1)' \
-            "${scrape_configs}" "${add_scrape_configs}" >> "${CONFIG_FILE}"
-    fi
-else
-    yq -NP e '[] + .' "${scrape_configs}" >> "${CONFIG_FILE}"
-fi

promtail/rootfs/etc/promtail/base_config.yaml

@@ -1,11 +0,0 @@
----
-server:
-  http_listen_port: 9080
-  grpc_listen_port: 0
-  log_level: "${LOG_LEVEL}"
-
-positions:
-  filename: /data/promtail/positions.yaml
-
-clients:
-  - url: "${URL}"

promtail/rootfs/etc/promtail/default-scrape-config.yaml

@@ -1,27 +0,0 @@
----
-- job_name: journal
-  journal:
-    json: false
-    max_age: 12h
-    labels:
-      job: systemd-journal
-    path: "${JOURNAL_PATH}"
-  relabel_configs:
-    - source_labels:
-        - __journal__systemd_unit
-      target_label: unit
-    - source_labels:
-        - __journal__hostname
-      target_label: nodename
-    - source_labels:
-        - __journal_syslog_identifier
-      target_label: syslog_identifier
-    - source_labels:
-        - __journal_container_name
-      target_label: container_name
-  pipeline_stages:
-    - match:
-        selector: '{container_name=~"homeassistant|hassio_supervisor"}'
-        stages:
-          - multiline:
-              firstline: '^\x{001b}'

promtail/rootfs/etc/services.d/promtail/finish

@@ -1,15 +0,0 @@
-#!/usr/bin/env bashio
-# ==============================================================================
-# Take down the S6 supervision tree when Promtail fails
-# s6-overlay docs: https://github.com/just-containers/s6-overlay
-# ==============================================================================
-
-declare APP_EXIT_CODE=${1}
-
-if [[ "${APP_EXIT_CODE}" -ne 0 ]] && [[ "${APP_EXIT_CODE}" -ne 256 ]]; then
-  bashio::log.warning "Halt add-on with exit code ${APP_EXIT_CODE}"
-  echo "${APP_EXIT_CODE}" > /run/s6-linux-init-container-results/exitcode
-  exec /run/s6/basedir/bin/halt
-fi
-
-bashio::log.info "Service restart after closing"

promtail/rootfs/etc/services.d/promtail/run

@@ -1,40 +0,0 @@
-#!/usr/bin/with-contenv bashio
-# shellcheck shell=bash
-# ==============================================================================
-# Home Assistant Add-on: Promtail
-# Runs Promtail
-# ==============================================================================
-readonly PROMTAIL_CONFIG='/etc/promtail/config.yaml'
-declare log_level
-
-bashio::log.info 'Starting Promtail...'
-
-journal_path='/var/log/journal'
-if ! bashio::fs.directory_exists "${journal_path}" || [ -z "$(ls -A ${journal_path})" ]; then
-    bashio::log.info "No journal at ${journal_path}, looking for journal in /run/log/journal instead"
-    journal_path='/run/log/journal'
-fi
-
-case "$(bashio::config 'log_level')" in \
-    trace)      ;& \
-    debug)      log_level='debug' ;; \
-    notice)     ;& \
-    warning)    log_level='warn' ;; \
-    error)      ;& \
-    fatal)      log_level='error' ;; \
-    *)          log_level='info' ;; \
-esac;
-bashio::log.info "Promtail log level set to ${log_level}"
-
-export "URL=$(bashio::config 'client.url')"
-export "JOURNAL_PATH=${journal_path}"
-export "LOG_LEVEL=${log_level}"
-
-promtail_args=("-config.expand-env=true" "-config.file=${PROMTAIL_CONFIG}")
-if [ "${log_level}" == "debug" ]; then
-    bashio::log.debug "Logging full config on startup for debugging..."
-    promtail_args+=("-print-config-stderr=true")
-fi
-
-bashio::log.info "Handing over control to Promtail..."
-/usr/bin/promtail "${promtail_args[@]}"

telegraf/Dockerfile

@@ -1,67 +0,0 @@
-ARG BUILD_FROM
-FROM ${BUILD_FROM}
-
-# Build arguments
-ARG BUILD_ARCH
-ARG BUILD_DATE
-ARG BUILD_DESCRIPTION
-ARG BUILD_NAME
-ARG BUILD_REF
-ARG BUILD_REPOSITORY
-ARG BUILD_VERSION
-ARG TELEGRAF_VERSION
-
-# Environment variables
-ENV \
-    HOME="/root" \
-    LANG="C.UTF-8" \
-    PS1="$(whoami)@$(hostname):$(pwd)$ " \
-    TERM="xterm-256color"
-
-# Copy root filesystem
-COPY rootfs /
-
-# Set shell
-SHELL ["/bin/bash", "-o", "pipefail", "-c"]
-
-RUN DEBIAN_FRONTEND=noninteractive apt-get update && \
-    DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends bash ca-certificates curl jq tzdata xz-utils iputils-ping snmp procps lm-sensors libcap2-bin wget gnupg && \
-    c_rehash && \
-    rm -rf /var/lib/apt/lists/*
-
-ENV TELEGRAF_VERSION ${TELEGRAF_VERSION}
-RUN set -ex && \
-    mkdir ~/.gnupg && \
-    chmod 600 ~/.gnupg/* && \
-    chmod 700 ~/.gnupg && \
-    echo "disable-ipv6" >> ~/.gnupg/dirmngr.conf; \
-    wget -q https://repos.influxdata.com/influxdata-archive_compat.key && \
-    echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c &&     cat influxdata-archive_compat.key | gpg --dearmor | tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null && \
-    echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | tee /etc/apt/sources.list.d/influxdata.list && \
-    apt-get update && \
-    apt-get install telegraf=${TELEGRAF_VERSION} && \
-    rm -rf /var/lib/apt/lists/*
-
-EXPOSE 8125/udp 8092/udp 8094
-
-COPY entrypoint.sh /entrypoint.sh
-COPY settings.sh /settings.sh
-ENTRYPOINT ["/entrypoint.sh"]
-CMD ["telegraf"]
-
-# Labels
-LABEL \
-    io.hass.name="${BUILD_NAME}" \
-    io.hass.description="${BUILD_DESCRIPTION}" \
-    io.hass.arch="${BUILD_ARCH}" \
-    io.hass.type="addon" \
-    io.hass.version=${BUILD_VERSION} \
-    maintainer="fbonelle" \
-    org.opencontainers.image.title="${BUILD_NAME}" \
-    org.opencontainers.image.description="${BUILD_DESCRIPTION}" \
-    org.opencontainers.image.vendor="fbonelle's addons" \
-    org.opencontainers.image.authors="fbonelle" \
-    org.opencontainers.image.licenses="MIT" \
-    org.opencontainers.image.created=${BUILD_DATE} \
-    org.opencontainers.image.revision=${BUILD_REF} \
-    org.opencontainers.image.version=${BUILD_VERSION}

telegraf/build.yaml

@@ -1,8 +0,0 @@
-build_from:
-  aarch64: ghcr.io/hassio-addons/debian-base:7.3.5
-  amd64: ghcr.io/hassio-addons/debian-base:7.3.5
-  armhf: ghcr.io/hassio-addons/debian-base:7.3.5
-  armv7: ghcr.io/hassio-addons/debian-base:7.3.5
-  i386: ghcr.io/hassio-addons/debian-base:7.3.5
-args:
-  TELEGRAF_VERSION: 1.31.1-1

telegraf/config.yaml

@@ -1,39 +0,0 @@
----
-name: Telegraf
-version: 1.31.1-1
-slug: hassio_telegraf
-description: An addon to add telegraf to hassio.
-url: https://gitea.bonelle-family.dscloud.biz/francois.bonelle/hassio-repo.git
-init: false
-arch:
-  - aarch64
-  - amd64
-  - armhf
-  - armv7
-  - i386
-ports:
-  9273/tcp: 9273
-hassio_api: true
-hassio_role: default
-host_network: true
-auth_api: true
-privileged:
-- SYS_ADMIN
-apparmor: false
-map:
-- config:rw
-- ssl:rw
-- addons:rw
-- backup:rw
-- share:rw
-startup: services
-boot: manual
-docker_api: true
-host_pid: true
-full_access: true
-options:
-  custom_conf:
-    location: "/config/telegraf.conf"
-schema:
-  custom_conf:
-    location: str

telegraf/entrypoint.sh

@@ -1,17 +0,0 @@
-#!/bin/bash
-set -e
-
-bashio /settings.sh
-
-if [ "${1:0:1}" = '-' ]; then
-    set -- telegraf "$@"
-fi
-
-if [ $EUID -ne 0 ]; then
-    exec "$@"
-else
-    # Allow telegraf to send ICMP packets and bind to privliged ports
-    setcap cap_net_raw,cap_net_bind_service+ep /usr/bin/telegraf || echo "Failed to set additional capabilities on /usr/bin/telegraf"
-
-    exec setpriv --reuid root --init-groups "$@"
-fi

telegraf/rootfs/etc/conf-init.d/00-banner.sh

@@ -1,37 +0,0 @@
-#!/command/with-contenv bashio
-# ==============================================================================
-# Home Assistant Community Add-on: Base Images
-# Displays a simple add-on banner on startup
-# ==============================================================================
-if bashio::supervisor.ping; then
-    bashio::log.blue \
-        '-----------------------------------------------------------'
-    bashio::log.blue " Add-on: $(bashio::addon.name)"
-    bashio::log.blue " $(bashio::addon.description)"
-    bashio::log.blue \
-        '-----------------------------------------------------------'
-
-    bashio::log.blue " Add-on version: $(bashio::addon.version)"
-    if bashio::var.true "$(bashio::addon.update_available)"; then
-        bashio::log.magenta ' There is an update available for this add-on!'
-        bashio::log.magenta \
-            " Latest add-on version: $(bashio::addon.version_latest)"
-        bashio::log.magenta ' Please consider upgrading as soon as possible.'
-    else
-        bashio::log.green ' You are running the latest version of this add-on.'
-    fi
-
-    bashio::log.blue " System: $(bashio::info.operating_system)" \
-        " ($(bashio::info.arch) / $(bashio::info.machine))"
-    bashio::log.blue " Home Assistant Core: $(bashio::info.homeassistant)"
-    bashio::log.blue " Home Assistant Supervisor: $(bashio::info.supervisor)"
-
-    bashio::log.blue \
-        '-----------------------------------------------------------'
-    bashio::log.blue \
-        ' Please, share the above information when looking for help'
-    bashio::log.blue \
-        ' or support in, e.g., GitHub, forums or the Discord chat.'
-    bashio::log.blue \
-        '-----------------------------------------------------------'
-fi

telegraf/rootfs/etc/conf-init.d/01-log-level.sh

@@ -1,46 +0,0 @@
-#!/command/with-contenv bashio
-# ==============================================================================
-# Home Assistant Community Add-on: Base Images
-# Sets the log level correctly
-# ==============================================================================
-declare log_level
-
-# Check if the log level configuration option exists
-if bashio::config.exists log_level; then
-
-    # Find the matching LOG_LEVEL
-    log_level=$(bashio::string.lower "$(bashio::config log_level)")
-    case "${log_level}" in
-        all)
-            log_level="${__BASHIO_LOG_LEVEL_ALL}"
-            ;;
-        trace)
-            log_level="${__BASHIO_LOG_LEVEL_TRACE}"
-            ;;
-        debug)
-            log_level="${__BASHIO_LOG_LEVEL_DEBUG}"
-            ;;
-        info)
-            log_level="${__BASHIO_LOG_LEVEL_INFO}"
-            ;;
-        notice)
-            log_level="${__BASHIO_LOG_LEVEL_NOTICE}"
-            ;;
-        warning)
-            log_level="${__BASHIO_LOG_LEVEL_WARNING}"
-            ;;
-        error)
-            log_level="${__BASHIO_LOG_LEVEL_ERROR}"
-            ;;
-        fatal)
-            log_level="${__BASHIO_LOG_LEVEL_FATAL}"
-            ;;
-        off)
-            log_level="${__BASHIO_LOG_LEVEL_OFF}"
-            ;;
-        *)
-            bashio::exit.nok "Unknown log_level: ${log_level}"
-    esac
-
-    bashio::log.blue "Log level is set to ${__BASHIO_LOG_LEVELS[$log_level]}"
-fi

telegraf/rootfs/etc/conf-init.d/02-set-timezone.sh

@@ -1,11 +0,0 @@
-#!/command/with-contenv bashio
-# ==============================================================================
-# Home Assistant Community Add-on: Base Images
-# Configures the timezone
-# ==============================================================================
-if ! bashio::var.is_empty "${TZ}"; then
-    bashio::log.info "Configuring timezone"
-
-    ln --symbolic --no-dereference --force "/usr/share/zoneinfo/${TZ}" /etc/localtime
-    echo "${TZ}" > /etc/timezone
-fi

telegraf/settings.sh

@@ -1,13 +0,0 @@
-#!/usr/bin/env bashio
-declare hostname
-bashio::require.unprotected
-
-readonly CONFIG="/etc/telegraf/telegraf.conf"
-
-CUSTOM_CONF=$(bashio::config 'custom_conf.location')
-
-bashio::log.info "Using custom conf file"
-rm /etc/telegraf/telegraf.conf
-cp "${CUSTOM_CONF}" /etc/telegraf/telegraf.conf
-
-bashio::log.info "Finished updating config, Starting Telegraf"